Desiccant Type Air Dryer

DRY AIR INCEREASES THE PRODUCTIVITY OF YOUR COMPRESSED AIR SYSTEM

DRY AIR ADDS PRODUCTIVITY TO PLANT OPERATIONS

With dry air, air distribution systems can be designed without the added cost of sloped lines, U loops, driplegs and a multitude of "point-of-use" filters and traps.

1) Dry air keeps lubricants from washing away: air tools, motors, cylinders and vales have a longer life.
2) Dry air keeps rust and scale from forming and causing wear in downstream equipment.

1) Dry air reduces the potential for leaks and minimizes pressure drop throughout the system due to pipeline corrosion.
This means more usable power downstream.

DRY AIR ADDS PRODUCTIVITY TO MANUFACURING OPERATIONS

1) Dry air allows work to begin immediately, no need for air line purging.
2) With dry air no time is wasted draining and maintaining traps and filters through the plant.

1) Dry air saves on redoing paint, power coating jobs where water causes surface blemishes.
2) Dry air reduces product contamination when compressed air is used for mixing, agitation, or conveying.
3) Dry Air keeps the processes stable by keeping critical pneumatic instruments operating accurately.

1) Dry air eliminates fouling and freeze-ups of small orifices found in pneumatic instruments and fluid logic devise. 2) Dry air keeps sandblasting feed lines and spray nozzles from clogging 3) Dry air keeps expensive pneumatic controlled machinery on line

FEATURE:-

• Wide range of sizes to suit your requirement 10, 25, 50, 75, 100, 125, 200 and many more.
• Calibrated needle valve to adjust purge flow to actual outlet flow and pressure conditions.
• Overlapping cycle time to provide constant downstream pressure and dew point.
• Normally open shuttle valve allows air flow through dryer if power failure should occur.
• Integral wall mounting bracket on all models.
• Easily installed-just make the air connections and plug in the electrical power cord..
• Versatile piping-two inlets and outlets in front, one inlet and outlet in rear
• Lightweight and compact.
• Trouble free and reliable performance.

How To order :

Industrial applications where ultra-dry air or very low dew point (-40° F pressure dew point) is required.
Installations where downstream air systems are exposed to ambient temperatures down to ---- -40 Deg F (-40 Deg C).
Pneumatic instrumentation and controls
Paint spraying, plastic and epoxy coatings, powder coating.
Engineering and scientific laboratories.
Controllers, transmitters, valve positioners operators, air bearing and air motors Audio-video cassette rewinding machines/CD plants.
To protect Actuators.
Food packing/ processing / pharmaceuticals/ tablet packing.

TECHINCAL NOTE:

1) To extend the service life of the desiccant powder, install a Siemag 5-Micron general purpose Filter, a Micro Coalescer and a Activated Carbon Filter upstream of dryer.
2) To remove possible traces of desiccant powder, install a Siemag 5-Micron general purpose Filter downstream of Dryer.