Products
Coalescing Filters
Siemag Micro Coalescor Filter range combines a completely new filter housing with a high performance pleated filter element to eliminate oil from compressed air. The pleated filter construction exposes more than twice the surface area than normal filter of the same size resulting in a much longer service life. The reduction of maintenance and replacement element cost plus the use of only the highest quality materials makes this filter system the best. The Siemag range of Micro-Coalescor Filter have a proven ability under both laboratory and industrial conditions providing clean compressed air for the most stringent of applications.
The filter housing are of all metal construction and fitted with manual drain mechanisms. Auto Drains are optional. Differential pressure gauges are available upon request.
Size Model:
| MODEL NO. | INCH | MM | SCFM |
| MCPL23 – MIDI | 1/4 | 1/4 | 020 |
| MCPL48 – SH3 | 3/8 | 10 | 030 |
| MCPL48 – SH4 | 1/2 | 15 | 060 |
| MCPL48 – SH6 | 3/4 | 20 | 90 |
| MCPL421 – SH6 | 3/4 | 20 | 135 |
| MCPL421-SH8 | 1 | 25 | 180 |
| MCPD812-SH14 | 1-1/2 | 40 | 350 |
| MCPD812-SH16 | 2 | 50 | 500 |
| MCPD822-SH18 | 3 | 75 | 1000 |
* MC-Microcoalescor / PL-Grade Of Filter Cartridge / 48-ElementModel / SH-Hsg Model / 2-Size: 1/4"
How to Order :
Indicate the grade of filter cartridge by putting the appropriate no. after the filter type (e.g. MC & then the Grade PL/PD and then followed with the other details)
SELECTION AND USE :
Select the filter model from the table below depending on pressure and flow rate requirements. Install as close to the application and replace filter elements when the pressure loss reaches 0.7 bar. For applications with a high degree of contamination the use of pre filtration is recommended. These are available upon request.
| 0p. Pr. bar g(PSIG) | 1(15) | 2(29) | 3(44) | 4(58) | 5(73) | 6(87) | 7(100) | 8(116) | 9(130) | 10(145) |
| Mult. Flow Rate by | 0.25 | 0.30 | 0.50 | 0.63 | 0.75 | 0.88 | 1.00 | 1.13 | 1.25 | 1.38 |
MAT. OF CONST:
| Body | Die Cast Aluminium |
| Bowl | Die Cast Aluminium |
| Sight Glass | Polycarbonate |
| Cartridage | Borosilicate Glass Fibre |
| Max Op Pressure | 17 bar g (250 psig) |
| Efficiency better than | 99.9999% by DOP or BS 3928 |
| Max Op Temp | 66°C |
| Min Op Temp | 1.5°C |
| Particle Removal | 0.01 Micron and above |
| Initial Pressure loss | 0.07 bar |
| Operating Pressure loss | 0.3 bar |
| Replace Filter element at | 0.7 bar pressure loss |
| Max remaining oil content | 0.01mg/m3 at 20°C |